Warehouse Heating 50,000 sq. ft for A-Safe

Details

Customer Name	A-Safe
Location	Elland, West Yorkshire
Building Use	Warehouse
Size of Building / Construction	50,000 sq. ft
Heaters	Winterwarm / Warmco TR50 suspended warm air heaters and Powrmatic air rotation heaters.
Fuel Supply	Natural Gas
Ancillary Equipment	DB8 Control Panel and MC200 thermostatic controller

Customer Brief:

Warmco were commissioned to install heating into two areas of these premises. Firstly, we installed two Powrmatic (400kw) air rotation heaters, to heat the 50,000 sq. ft warehouse space. Additionally, we chose to put two Winterwarm TR50, natural gas fired, suspended, warm air space heaters into the adjacent 4,000 sq. ft workshop area, for this manufacturer of safety barriers, in October 2018. This customer was expanding into these premises and asked us to install heating into the warehouse and workshop areas. All of these heaters comply with ErP as determined by EU2015/1188.

Features of the Heating System:

For the larger stock warehouse area, we specified two 400kw Powrmatic Air Rotation heaters, to efficiently heat the large volumes of air in this building and to prevent damage to goods being stored. One major advantage of these heaters is that they can be located outside the building and heat the internal space very efficiently, whilst freeing up internal floor space. The principle of air rotation it to move large volumes of air heated to a lower temperature at low velocity.
Cooler low level air is constantly drawn through the heater and discharged at a higher level, de-stratifying the building and in turn, lowering the temperature gradient within the heated area. At full power the 400kw of this model can take the space to the desired temperature quickly, then the unit can fully modulate its heat output down to 240kw to maintain the desired temperature, (as measured by the air sensor / MC200 thermostatic control panel). This facility can offer fuel savings of up to 40% against a standard non-modulating heater.
The adjacent 4,000 sq. ft workshop space was heated using two Winterwarm TR50, natural gas fired, suspended warm air heaters. These can modulate from 50kw at full power down to 32kw once the building is up to temperature. This gives our customer a cumulative heat output variation of 36kw, offering a saving of up to 30% on fuel costs.
The whole project in Elland, took us four weeks to complete and our engineers worked round the customer’s production schedules and storage logistics, to create as little disruption as possible.

Get a quote

Fields marked with an asterisk(*) are required.

Contact information

Name*

Company name*

Preferred telephone number*

Email address*

Postcode*

Your preferred method of contact*

Telephone

Please tell us about your building

Your building use

Building dimensions*

Please give us the length, width and height of the building to be heated. If your building has an apex, please give us the height to the eaves, then also to the apex.

Unit of measurement*

Please select the unit of measurement for the building dimensions.

Temperature requirements

Age of building / levels of insulation

Fuel source*

Additional information

If there is any other information that you think is relevant, please note it down here.

If you wish to send any extra information such as formal plans, sketch plans or photos these can help us to give you a more accurate quote. Please send these as attachments to contactus@warmco.co.uk and give ‘Quote for your company name / your name’ as the title for your email.

Testimonials

The heater installed by Warmco is absolutely brilliant! It has surpassed our expectations… it is very efficient on gas consumption and overall working with Warmco will save us a lot of money in future. All in all we are over the moon with our heating system and would be very happy to recommend Warmco’s services to anyone.

Russ Moore – A S Plant, Mansfield October 2020

Warmco were very quick to respond to our request for a survey and to quote for our heating; much faster than the response time that I have generally come to expect form other companies. The engineers communicated well and worked round our site requirements, to create minimal disruption to ourselves and our customers. We are pleased with our heating, it is working well. Warmco have been available to assist with giving advice on our system. Overall, we were very impressed from the start to finish of our dealings with Warmco.

Mark Donoghue – Brownhills Leisure World – November 2020

Overall I'm happy with the service provided by Warmco. The site visit and quoting process was good. The install guys were good, on time, seemed to get on with the job and completed it on time with good communications. As for the heaters, as it hasn’t been too cold as yet, I can't comment fully on how effective they are.”

Darrell Freeman – Big Dude Clothing, Ellesmere Port October 2020

Warmco were knowledgeable when it came to recommending a heating system to us. They explained the system in a way that gave us confidence in the products and services they were offering. Most importantly, the price was right. The installation was great, the engineers came when we were told they would, worked round our warehouse operations, did a neat job of the installation and were clean and tidy. We are pleased to say that the heating does exactly what we need it to do.

Kevin Wright – Italy Hair and Beauty Ltd, Wrexham - August 2020